Saturday, September 29, 2018

NIVELCO EasyTREK SP-500 Series Level Transmitters

The newest generation EasyTREK SP-500 series level transmitters are based on NIVELCO’s 35 years of experience with ultrasonic level measurement. The IP68 rated units have their transducer and processing electronics incorporated in one single housing. The new EasyTREK transmitters utilize HART® 7 communication so they can be used in multidrop systems connected to MultiCONT process controller/display, or to a PC with the help of the UNICOMM HART®-USB modem or similar. The transmitters can be remotely programmed also with Handheld Field Communicator, and can be connected wirelessly to a PC with the SAT-504 Bluetooth® HART® modem.

The ultrasonic level metering technology is based on the principle of measuring the time required for the ultrasound pulses to cover the distance from the sensor to the level to be measured and back. The echoes bounced back from the surface of the medium to be measured reach the sensor surface after the time of flight of the ultrasonic impulse. The time of flight of the reflected signal is measured and processed by the electronics, and then this is converted to distance, level, volume or flow proportional data using the customizable tank dimensions or the pre-programmed flume / weir parameters.

Download the NIVELCO EasyTREK SP-500 Series Level Transmitter brochure here.

For more information, contact Arjay Automation by visiting or by calling (800) 761-1749.